RONLON would like to share with you the operating procedures of the floor grinder.

1. Check the protective cover and auxiliary handle carefully before using the floor grinder, and they must be intact and not loose.

2. Before installing the grinding wheel, pay attention to whether there is any phenomenon of moisture and missing corners, and the installation must be firm without looseness. It is strictly forbidden to use other external tools to hit the clamping nut of the grinding wheel without special tools.

3. The power socket used must be equipped with a leakage switch device, and check whether the power cord is damaged.

4. The floor grinder needs to be turned on for a trial run before use, to see if the grinding sheet is running smoothly and normally, and to check the degree of wear on the carbon brush, and a professional should replace it in a timely manner, and it can be used normally after confirmation.

5. When using the floor grinder, remember not to use too much force, but to apply force slowly and evenly to avoid the phenomenon that the grinding sheet is smashed. If the grinding sheet is jammed, stop the floor grinder immediately to avoid burning out The floor grinder may cause hidden dangers due to broken grinding sheets.